TV Mounting Cost by Size in LA: 32" through 85" Broken Down
Screen size is the single biggest input to a TV-mount quote in Los Angeles. A 32-inch bedroom mount and an 85-inch living-room install are technically the same job — "hang a TV on a wall" — but the bracket, hardware, labor time, and even the number of people on the truck are completely different. This guide breaks LA install pricing into the six size brackets pros actually quote against, so you know where your TV lands before you describe the job.
Quick answer
LA TV-mount install pricing tracks screen size almost linearly: 32–43" runs $80–$140, 50–55" is $120–$180, 60–65" is $150–$220, 70–75" is $180–$280, and 80–85" lands $250–$350+ (two-person install). On top of size, wall type adds $40–$120 and accessories (soundbar, articulating arm, in-wall power, raceway) add $25–$320. The total quote is always size + wall + accessories — not just size.
32–43 inch (kitchen, bedroom, office): $80–$140
The lightweight tier — typical screen weight 15–25 lbs, which means a single-stud mount is structurally fine on a standard 2x4 framed wall. Most installs use a fixed or tilt bracket in the $30–$50 range, and a pro is in and out in 15–30 minutes. The minimum trip charge usually drives the bill more than the labor minutes.
Where LA gets specific: kitchen mounts above counters need 17–19 inches of clearance from the countertop to the bottom of the screen to clear small appliances and avoid steam exposure. Bedroom mounts sit at 42–50 inches floor-to-bottom-of-screen for comfortable seated viewing from the bed. Office mounts land at standing eye-level (roughly 58–62 inches floor-to-center).
What pushes the price toward $140: cable concealment through the wall, an articulating arm, or a non-standard wall type. To start a job in this range, the Los Angeles TV mounting page is where you describe the room and get routed.
50–55 inch (most common LA living room TV): $120–$180
The most-quoted size in LA right now. Typical screen weight is 35–55 lbs — still within single-stud territory if the bracket is rated for it, though most pros go to a two-stud bracket on anything over ~45 lbs for safety margin. Tilt and articulating arms are roughly 50/50 in this bracket: tilt is fine if seating is directly in front; articulating earns its keep in open-plan rooms where viewing angles vary.
55 inches is the gateway-to-streaming-stack size. Many installs at this tier bundle a small streaming device (Apple TV, Roku Ultra, Fire TV Cube) setup as a $30–$60 add-on. If you haven't unboxed the device yet, it's usually worth the add — the pro will mount, configure Wi-Fi, sign in to services, and tidy cables in one trip.
What pushes the price up: in-wall power relocation, HDMI run through the wall to a media cabinet, or a soundbar bracket below the screen. None are size-driven — they'd cost the same on a 32-inch — but they appear more often at this tier because home-theater intent kicks in. The national-level TV mounting service page has the full intake if you want to describe the accessories upfront.
60–65 inch (premium home theater): $150–$220
At this bracket TVs run 50–80 lbs, and a two-stud bracket is non-negotiable — single-stud mounts at this weight cause most "TV fell off the wall" calls. The bracket jumps to $60–$100, with articulating arms (which apply leverage that doubles the effective pull force on the wall) pushing closer to $100–$140.
Articulating arms are popular at this size for corner mounts — the geometry of 65-inch panels in living rooms with non-rectangular walls makes a swing-out arm the only viable option in roughly one in three LA installs. Westside neighborhoods (Beverly Hills, Brentwood, Pacific Palisades) lean heavily into 65-inch as the standard living-room size, often paired with a soundbar bracket below.
Above-fireplace installs carry a premium of $30–$80 if the wall is masonry rather than framed drywall — brick and stone need masonry anchors, a hammer drill, and noticeably more setup time. If your wall is masonry, the sibling guide on TV mount: drywall, stud, brick, or concrete walks through each wall type.
70–75 inch (modern LA living room standard): $180–$280
The new default for LA living rooms built or remodeled in the last five years. TVs at this bracket weigh 70–110 lbs and require a heavy-duty two-stud bracket rated for the load — the bracket alone costs $80–$160, roughly double a small-TV bracket. Install takes 60–90 minutes because the bracket has to be located, drilled, and torqued carefully.
Cable management gets serious here. A bare 75-inch with two black cables hanging from the bottom looks like a missed install, so most pros quote either a surface raceway ($25–$60 in parts) or an in-wall power relocation kit ($140–$320 installed). If the wall is finished drywall, in-wall is doable; if it's plaster-and-lath (common in pre-1950s homes from Hancock Park to Los Feliz), expect the raceway recommendation instead.
LA neighborhoods where 75-inch dominates: Toluca Lake, Studio City, Bel-Air, Hidden Hills, and the newer Playa Vista and Cumulus builds. In those areas, expect the pro to assume two-stud heavy-duty bracket without you having to spec it.
80–85 inch (commercial-grade home theater): $250–$350+
The bracket where the job changes character. Screens are 100–150 lbs, mount patterns frequently jump from VESA 600x400 to 800x600 or custom plates, and the install requires two people on the truck — not an upsell, just the physics of lifting a screen this size onto a wall bracket safely. Anyone offering to solo-install an 85-inch is either inexperienced or about to drop your TV.
Hardware shifts too. Brackets run $140–$280 because they have to be rated for the dynamic load (including articulating-arm leverage) on a screen this size. Install takes 90–120 minutes minimum, and the trip carries two billable laborers — the main reason the fee floors at $250 even on a clean stud wall.
LA has a real concentration of this tier: Burbank, Studio City, and Toluca Lake home offices for industry editors and colorists often want reference-grade displays for color review or dailies playback. Above-fireplace installs at this size mean scaffolding plus two pros, which pushes total install cost past $400 on masonry. If yours is above-fireplace at 85 inches, expect the pro to want photos before quoting — that's good practice, not stalling.
What every size shares: wall type + accessories + cable management
Here's the part that most cost-by-size articles miss: the TV size sets the floor, but the wall type and the accessories often add more to the final quote than the size itself. Across all six brackets above, the same adders apply.
- Wall type: +$40–$120 above the base. Drywall over wood studs is the cheapest. Drywall over steel studs costs more because you need toggle-bolt or steel-stud-specific anchors. Brick, concrete, and plaster-and-lath all need specialty drilling and anchors. The wall-type guide covers each in detail.
- Soundbar bracket: +$40–$80 installed. Mounts below the TV on the same wall, usually with its own small two-bolt plate.
- Articulating arm (vs fixed or tilt): +$40–$80 in bracket cost alone, plus a bit more install time because the wall plate is bigger and needs more careful stud alignment.
- In-wall power kit: +$140–$320 installed. Code-compliant kit (recessed receptacle behind the TV, low-voltage pass-through for HDMI) is the cleanest possible install but adds a meaningful chunk to the quote.
- Surface raceway: +$25–$60. The budget-friendly cable-hiding option — paintable plastic channel that runs from TV down to outlet. Less elegant than in-wall but a fraction of the cost.
The honest framing: don't anchor your budget on "how much to mount a 65-inch TV." Anchor it on size + wall + accessories together. A bare 65-inch on drywall over studs with a tilt bracket is $150. The same 65-inch on a brick fireplace with an articulating arm, in-wall power, and a soundbar bracket below is closer to $500 — and it's not because the pro is gouging, it's because that's four separate skilled tasks bundled into one trip. If you're renting, the rental-friendly mounting guide covers no-drill and patch-on-move-out options that change the math entirely.
When you're ready to describe what you have, start at the LA TV mounting hub — the intake asks about screen size, wall type, and accessories together so the routed pro can give you a real number rather than a placeholder.
Frequently asked
How much does it cost to mount a 32 inch TV in LA?
A 32-inch TV mount install in Los Angeles typically runs $80–$140. The base install on standard drywall over wood studs lands closer to $80–$100; the upper end reflects in-wall cable concealment, an articulating arm, or a non-standard wall type. Hardware in this bracket is light (15–25 lbs screen, $30–$50 bracket), so most of the bill is the trip + labor minimum.
What's the cost difference between mounting a 55 and 75 inch TV?
A 55-inch typically lands $120–$180; a 75-inch is $180–$280. The roughly $60–$100 spread reflects three things: a heavier-duty two-stud bracket (+$40–$80 in parts), more install time (45 vs 75 minutes typical), and the fact that 75-inch installs almost always include some form of cable management because bare cables on a screen that size look obviously unfinished.
Do larger TVs need more expensive brackets?
Yes — meaningfully. A 32-inch bracket runs $30–$50; a 55-inch is $40–$80; a 75-inch is $80–$160; an 85-inch is $140–$280. Two factors drive the jump: load rating (the bracket has to be physically certified for the screen weight plus a safety multiplier) and mount pattern (anything 80+ inches frequently uses VESA 800x600 or custom plates that cost more to manufacture).
How long does a TV mount install take by size?
Typical install time scales with size: 32–43" = 15–30 minutes, 50–55" = 30–45 minutes, 60–65" = 45–60 minutes, 70–75" = 60–90 minutes, and 80–85" = 90–120 minutes (with two installers). Cable management, in-wall power, or a non-stud wall type adds 30–60 minutes on top regardless of TV size.
What's the heaviest TV one person can mount alone?
Industry rule of thumb is roughly 65 inches / 70 lbs for a single installer, and only when the bracket is a flat or tilt design with the screen lifted onto fixed wall hooks. Anything heavier or with an articulating arm needs two people for safe placement — not as policy but as physics. 75-inch installs are a judgment call (some pros solo, most don't); 80-inch and up should always be two-person.
How much extra for an 85 inch TV install?
An 85-inch install in LA runs $250–$350+ on a standard wall, which is roughly $100–$150 above a 65-inch install. The extra cost reflects the two-person crew, the heavier-duty bracket ($140–$280 vs $60–$100), and longer install time. Above-fireplace 85-inch installs on masonry typically push past $400 due to scaffolding plus masonry drilling.
Ready to get it fixed?
Tell our AI what's going on. One local pro, ready to talk about your specific job and your neighborhood. The intro is on us — what happens after is between you and the pro.
Free to use. Handyum is paid by pros for the introduction, never by you.